Installing Linaro Image - Revision history

Adam: /* Introduction */

2012-08-13T19:05:50Z

‎Introduction

Adam: /* Introduction */

2012-08-13T19:05:05Z

‎Introduction

Adam: /* Installation */

2012-08-09T05:07:09Z

‎Installation

Adam: /* Installation */

2012-08-02T00:35:14Z

‎Installation

Adam: /* Installation */

2012-08-02T00:13:24Z

‎Installation

Adam: /* Installation */

2012-08-02T00:08:59Z

‎Installation

Adam: /* Installation */

2012-08-01T23:14:20Z

‎Installation

Adam: /* Installation */

2012-08-01T17:48:05Z

‎Installation

Adam: /* Installation */

2012-08-01T17:46:47Z

‎Installation

Adam: Created page with "== Introduction == In this tutorial, you will install a customized version of linux on your Overo. This particular version is based on [http://www.ubuntu.com Ubuntu Linux] (12...."

2012-07-31T23:44:55Z

Created page with "== Introduction == In this tutorial, you will install a customized version of linux on your Overo. This particular version is based on [http://www.ubuntu.com Ubuntu Linux] (12...."

New page

== Introduction ==

In this tutorial, you will install a customized version of linux on your Overo. This particular version is based on [http://www.ubuntu.com Ubuntu Linux] (12.04), one of the most popular Linux distribution today. It has been optimized and modified to run on ARM based devices by [http://www.linaro.org Linaro]. Therefore it will be referred to as the Linaro image from here on. The result of the customization is a lightweight, yet still very versatile version of linux. On top of the rock solid Linux Kernel 3.2, you will get a graphical desktop interface [http://www.lxde.org LXDE] which comes with a file browser, media player and as well as Google’s Chromium Web Browser. It will provide a good starting point for many Gumstix Overo users who want to further develop their own applications.

== Prerequisites ==

=== To install ===
*Computer with Ubuntu Linux 10.04 or later with internet connection
*Micro-SD card read/writer
*Micro-SD card size larger than 1 GB

=== To Use ===
*[https://www.gumstix.com/store/index.php?cPath=33 Gumstix Overo COM]
*[https://www.gumstix.com/store/index.php?cPath=40 Expansion board with HDMI port and ethernet port]
*Ethernet cable for the Overo to connect to a network
*Powered USB hub for peripherals such as keyboard and mouse on the Overo
*USB keyboard and mouse for the Overo

== Installation ==

On your host computer (ie your workstation):
# Install git
#: $ sudo apt-get install git
# Obtain the root file system and the hardware pack via direct downloads: [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz hwpack] [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz rootfs] or via [https://github.com/gumstix/Gumstix-Overo-Linaro Gumstix’s Github].
#:$ git clone git://github.com/gumstix/Gumstix-Overo-Linaro.git
:You can additionally check the integrity of the downloaded files by comparing the md5sum result in the [https://github.com/gumstix/Gumstix-Overo-Linaro/blob/master/README README] file.
# Now you need the tools to write the image onto a micro-SD card. Install linaro-image-tools
#:$ sudo apt-get install linaro-image-tools
# Insert micro-SD card to your card writer
#Execute the following command:
#:$ linaro-media-create --rootfs ext3 --mmc </dev/mmcblk0> --dev overo --hwpack <hwpack.tar.gz> --binary <rootfs.tar.gz> 
: Replace </dev/mmcblk0>, <hwpack.tar.gz> <rootfs.tar.gz> with the mount point of your micro-SD card, the location of the hardware pack, and the location of the root file system respectively.
# It will list disk devices attached on your computer, and will confirm with you the location of the micro-SD you have provided in the previous step. If correct, say yes or y.
# Answer yes or y to the questions when it needs to install packages
# When it is finished, insert the microSD card to your Overo
# Done!

== Using Linaro ==
To boot your Overo with the new Linaro image:

# Insert the micro-SD Card to the Overo COM
# Connect the HDMI and the Ethernet cables to the expansion board
# Attach peripherals through a powered USB hub
# Plug power into the power jack

Username:password are ''gumstix:gumstix'' 
Host name is ''overo'' (''overo.local'' if you want to reach from local area network)

== List of Notable Standard Applications ==

=== Accessories ===
* Disk Utility
* File Manager
* Calculator
* LXTerminal
* Leafpad

=== Internet ===
* Chromium Web Browser

=== Office ===
* Adobe Document Viewer
* AbiWord

== List of Hardware Pack Components ==
As per the manifest file which can also be found from the [https://github.com/gumstix/Gumstix-Overo-Linaro/blob/master/manifest Gumstix GitHub]:

:iw=3.2-1
:devio=1.2-1build1
:wireless-regdb=2011.04.28-1ubuntu3
:wireless-crda=1.16
:u-boot-tools=2011.09-2
:libnl-3-200=3.2.3-2ubuntu2
:linux-firmware=1.79
:uboot-mkimage=2011.09-2
:flash-kernel=2.28ubuntu42.2linaro1
:crda=1.1.2-1ubuntu1
:libnl-genl-3-200=3.2.3-2ubuntu2
:linux-headers-3.2.1-linaro-omap=3.2.1-linaro-omap-10.00.Custom
:linux-image-3.2.1-linaro-omap=3.2.1-linaro-omap-10.00.Custom

== Additional Tips ==
=== Enabling Audio ===
By default sound output is disabled. To enable sound, launch alsamixer through LXTerminal 
: $ alsamixer

And make the following changes: 
:Headset - This is the volume. 50 should work ok. 
:HeadsetL, HeadsetL, HeadsetL, HeadsetR, HeadsetR, HeadsetR shoud all be 00 

=== Changing Screen Resolution ===

=== Getting USB Host To Work ===

Exception of USB flash drive, the USB host port requires a powered USB hub to be functional with peripherals such as keyboard and mouse.

== Current Issues ==

=== Long network bring up time when Ethernet is not connected (Only wireless Overos) ===
Booting takes time without an ethernet cable plugged to the expansion board. This is because the failsafe script waits too long before giving up on acquiring an IP address. This is a poor implementation of fail safe mechanism. We are leaving it up to the upstream to decide how to deal with it.

=== Not all default desktop managers work ===
All desktop environments (Lubuntu, Lubuntu Netbook and Openbox) work. GNOME/Openbox seems to be misconfigured.

=== Hardware acceleration is not working for the Overos with OpenGL ===
Getting the driver for PowerVR/SGX to work with the Linaro image is a high priority task at the moment

== Source Code ==
You can obtain the source code for the kernel and the root file system from the [https://github.com/gumstix Gumstix Github].
* Repository for [https://github.com/gumstix/Gumstix-Overo-Kernel kernel]
* Repository for [https://github.com/gumstix/Gumstix-Overo-LiveBuild root file system] (Debian Live Build)

You can also directly download the tar-balls of the [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-Kernel-3.2.tar.gz kernel], [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz hardware pack], and the [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz root file system].

@@ Line 1: / Line 1: @@
 == Introduction ==
-In this tutorial, you will install a customized version of linux on your Overo. This particular version is based on [http://www.ubuntu.com Ubuntu Linux]  (12.04), one of the most popular Linux distribution today. It has been optimized and modified to run on ARM based devices by [http://www.linaro.org Linaro]. Therefore it will be referred to as the Linaro image from here on. The result of the customization is a lightweight, yet still very versatile version of linux. On top of the rock solid Linux Kernel 3.2, you will get a graphical desktop interface [http://www.lxde.org LXDE] which comes with a file browser, media player and as well as Google’s Chromium Web Browser. It will provide a good starting point for many Gumstix Overo users who want to further develop their own applications. Another version of this guide, with more detail, for the beginners is also found at [http://www.b1gtuna.com/2012/08/installing-linaro-image-on-gumstix-overo here]
+In this tutorial, you will install a customized version of linux on your Overo. This particular version is based on [http://www.ubuntu.com Ubuntu Linux]  (12.04), one of the most popular Linux distribution today. It has been optimized and modified to run on ARM based devices by [http://www.linaro.org Linaro]. Therefore it will be referred to as the Linaro image from here on. The result of the customization is a lightweight, yet still very versatile version of linux. On top of the rock solid Linux Kernel 3.2, you will get a graphical desktop interface [http://www.lxde.org LXDE] which comes with a file browser, media player and as well as Google’s Chromium Web Browser. It will provide a good starting point for many Gumstix Overo users who want to further develop their own applications. Another version of this guide, with more detail, for the beginners is also found [http://www.b1gtuna.com/2012/08/installing-linaro-image-on-gumstix-overo here]
 == Prerequisites ==

@@ Line 21: / Line 21: @@
 On your host computer (ie your workstation):
 # Install git
-  $ sudo apt-get install git
+#:  $ sudo apt-get install git
 # Obtain the root file system and the hardware pack via direct downloads: [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz hwpack] [https://s3.amazonaws.com/Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz rootfs] or via [https://github.com/gumstix/Gumstix-Overo-Linaro Gumstix’s Github].
-  $ git clone git://github.com/gumstix/Gumstix-Overo-Linaro.git
+#:  $ git clone git://github.com/gumstix/Gumstix-Overo-Linaro.git
-:You can additionally check the integrity of the downloaded files by comparing the md5sum result in the [https://github.com/gumstix/Gumstix-Overo-Linaro/blob/master/README README] file.
+#:You can additionally check the integrity of the downloaded files by comparing the md5sum result in the [https://github.com/gumstix/Gumstix-Overo-Linaro/blob/master/README README] file.
 # Now you need the tools to write the image onto a micro-SD card. Install linaro-image-tools
-  $ sudo apt-get install linaro-image-tools
+#:  $ sudo apt-get install linaro-image-tools
-−
 # Insert micro-SD card to your card writer
 #Execute the following command:
-  $ linaro-media-create --rootfs ext3 --mmc </dev/mmcblk0> --dev overo --hwpack <hwpack.tar.gz> --binary <rootfs.tar.gz> <br>
+#:  $ linaro-media-create --rootfs ext3 --mmc </dev/mmcblk0> --dev overo --hwpack <hwpack.tar.gz> --binary <rootfs.tar.gz> <br>
-: Replace </dev/mmcblk0>, <hwpack.tar.gz> <rootfs.tar.gz> with the mount point of your micro-SD card, the location of the hardware pack, and the location of the root file system respectively.
+#: Replace </dev/mmcblk0>, <hwpack.tar.gz> <rootfs.tar.gz> with the mount point of your micro-SD card, the location of the hardware pack, and the location of the root file system respectively.
-: For example:
+#: For example:
-  linaro-media-create --rootfs ext3 --mmc /dev/sdd --dev overo --hwpack Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz --binary Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz
+#:  $ linaro-media-create --rootfs ext3 --mmc /dev/sdd --dev overo --hwpack Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz --binary Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz
-−
 # It will list disk devices attached on your computer, and will confirm with you the location of the micro-SD you have provided in the previous step. If correct, say yes or y.
 # Answer yes or y to the questions when it needs to install packages
-  After this operation, 20.1 MB of additional disk space will be used.
+#:  After this operation, 20.1 MB of additional disk space will be used.
-  Do you want to continue [Y/n]? y
+#:  Do you want to continue [Y/n]? y
 # When it is finished, insert the microSD card to your Overo. It will probably take some time, as much as 20 minutes to complete.
 # Done!

@@ Line 39: / Line 39: @@
    After this operation, 20.1 MB of additional disk space will be used.
    Do you want to continue [Y/n]? y
-# When it is finished, insert the microSD card to your Overo
+# When it is finished, insert the microSD card to your Overo. It will probably take some time, as much as 20 minutes to complete.
 # Done!

@@ Line 33: / Line 33: @@
 : Replace </dev/mmcblk0>, <hwpack.tar.gz> <rootfs.tar.gz> with the mount point of your micro-SD card, the location of the hardware pack, and the location of the root file system respectively.
 : For example:
-   sudo linaro-media-create --rootfs ext3 --mmc /dev/mmcblk0 --binary linaro-n-ubuntu-desktop-tar-20110314-0.tar.gz --hwpack hwpack_linaro-overo_20110314-0_armel_supported.tar.gz --dev overo
+   linaro-media-create --rootfs ext3 --mmc /dev/sdd --dev overo --hwpack Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-armhf-HWPack.tar.gz --binary Gumstix-Overo-Linaro/Gumstix-Overo-Linaro-Precise-ALIP-armhf-RootFS.tar.gz
 # It will list disk devices attached on your computer, and will confirm with you the location of the micro-SD you have provided in the previous step. If correct, say yes or y.