Difference between revisions of "Change boot logo"
Aqisecoxefi (Talk | contribs) |
Searchworks (Talk | contribs) (remove spam) |
||
| Line 1: | Line 1: | ||
| − | |||
custom logo by the following method: | custom logo by the following method: | ||
Revision as of 15:39, 23 November 2010
custom logo by the following method:
The gumstix-fb-logo.patch is a diff between a custom image and the default Penguin 'logo_linux_clut224.ppm'. This image can be found in (for a Verdex):
gumstix-oe/tmp/work/gumstix-custom-verdex-angstrom-linux-gnueabi/gumstix-kernel-2.6.21-r1/linux-2.6.21/drivers/video/logo
You'll need the original image, so you can perform the following steps to get a pre-patched kernel:
bitbake -c clean gumstix-kernel
bitbake -c unpack gumstix-kernel
After you implement your patch, do:
bitbake gumstix-kernel
to finish the build.
You can then copy uImage over, and hopefully have a pretty, custom logo.
If the compile fails, it's likely due to a problem with your PPM. In Gimp, you need to set the palette to 224 colors and make sure you save it as ascii.
