Difference between revisions of "HostAPD WiFi Access Point On Gumstix Overo"
(Created page with "The Following USB WiFi devices have been used successfully with HostAPD as A WiFi Access Point using Gumstix Overo: P54 USB rt2800usb The following Device supports hostapd by...") |
|||
| Line 2: | Line 2: | ||
as A WiFi Access Point using Gumstix Overo: | as A WiFi Access Point using Gumstix Overo: | ||
| − | + | Use This Search Page to determine which model numbers and revisions can be used | |
| + | with Overo. | ||
| + | |||
| + | http://wireless.kernel.org/en/users/Devices/USB | ||
| + | |||
| + | Both Model Number and Revision are important. Manufacturers change chipsets between revisions. | ||
| + | |||
| + | |||
| + | |||
| + | P54USB | ||
| + | Tested with D-Link and Linksys. | ||
| + | 5 Volts Only, needs hub or supplemental power. | ||
| + | |||
rt2800usb | rt2800usb | ||
| + | Tested with WRL-11713 | ||
The following Device supports hostapd by design, but has not | The following Device supports hostapd by design, but has not | ||
| − | yet been validated on Gumstix Overo | + | yet been validated on Gumstix Overo: |
| + | |||
| + | SD8787 / W2CBW0015 | ||
| + | |||
| + | uses mwifiex driver | ||
| − | + | This is the driver for the SD8787 / W2CBW0015 chip which is the replacement for the, | |
| − | This is the driver for the | + | SD8686 / W2CBW003 which is now EOL from the manufacturer. |
| − | EOL from the manufacturer. | + | |
| − | The following device uses a manufacturer provided Access Point Application: | + | The following device uses a manufacturer-provided Access Point Application: |
| − | + | SD8686 / W2CBW003 | |
| − | The | + | The SD8686 / W2CBW003 chip does work as an access point, BUT you must obtain the |
firmware and reference driver from Wi2Wi. It only works up to kernel 2.6.29 without | firmware and reference driver from Wi2Wi. It only works up to kernel 2.6.29 without | ||
modifying the driver to use the newer net_dev_ops API. (Which has not been done). | modifying the driver to use the newer net_dev_ops API. (Which has not been done). | ||
Wi2Wi requires an NDA to download the driver. | Wi2Wi requires an NDA to download the driver. | ||
| − | The | + | The W2CBW003 chip is now end of life from the manufacturer. |
Revision as of 16:41, 21 April 2014
The Following USB WiFi devices have been used successfully with HostAPD as A WiFi Access Point using Gumstix Overo:
Use This Search Page to determine which model numbers and revisions can be used with Overo.
http://wireless.kernel.org/en/users/Devices/USB
Both Model Number and Revision are important. Manufacturers change chipsets between revisions.
P54USB Tested with D-Link and Linksys. 5 Volts Only, needs hub or supplemental power.
rt2800usb
Tested with WRL-11713
The following Device supports hostapd by design, but has not
yet been validated on Gumstix Overo:
SD8787 / W2CBW0015
uses mwifiex driver
This is the driver for the SD8787 / W2CBW0015 chip which is the replacement for the, SD8686 / W2CBW003 which is now EOL from the manufacturer.
The following device uses a manufacturer-provided Access Point Application:
SD8686 / W2CBW003
The SD8686 / W2CBW003 chip does work as an access point, BUT you must obtain the firmware and reference driver from Wi2Wi. It only works up to kernel 2.6.29 without modifying the driver to use the newer net_dev_ops API. (Which has not been done). Wi2Wi requires an NDA to download the driver.
The W2CBW003 chip is now end of life from the manufacturer.
