Difference between revisions of "U-Boot scripts"
From Gumstix User Wiki
m (add example of editors. Helpful for complete n00bs) |
m (punctuation) |
||
| Line 5: | Line 5: | ||
To generate a u-boot script that's executable, it has to be packed into an u-boot image using mkimage. | To generate a u-boot script that's executable, it has to be packed into an u-boot image using mkimage. | ||
| − | Use your favorite text editor | + | Use your favorite text editor (such as vi, nano, or pico) to create gumstix-factory.script.source, and then run the following command to generate the image: |
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n gumstix-factory.script -d gumstix-factory.script.source gumstix-factory.script | mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n gumstix-factory.script -d gumstix-factory.script.source gumstix-factory.script | ||
Revision as of 19:56, 13 May 2009
Modifying U-Boot scripts
The main useful script is gumstix-factory.script which, if found on the MMC or CF card will be executed during boot.
To generate a u-boot script that's executable, it has to be packed into an u-boot image using mkimage.
Use your favorite text editor (such as vi, nano, or pico) to create gumstix-factory.script.source, and then run the following command to generate the image:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n gumstix-factory.script -d gumstix-factory.script.source gumstix-factory.script
