Difference between revisions of "AudioIn"
Searchworks (Talk | contribs) (remove spam) |
Searchworks (Talk | contribs) (Category:How_to_-_audio) |
||
| Line 13: | Line 13: | ||
$ amixer -c 0 sset 'Analog Right Sub Mic' cap | $ amixer -c 0 sset 'Analog Right Sub Mic' cap | ||
</code> | </code> | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | [[Category:How_to_-_audio]] | ||
Revision as of 03:41, 19 November 2010
Some Overo expansion boards provide a standard Audio Out and an Audio Line-in. Without a pre-amplifier, plugging a microphone into this Line-In port just won't work.
To use a microphone with the Overo, connect a microphone to the Mic-in lines available on the Overo connectors (and broken out on the pin headers of some boards). In addition, you need to be using a kernel that is more recent that 25 Sept. 2010 (see here for recent pre-built images.
Capture Interface Settings
The audio Line-in uses the 'Analog Right AUXR' and the 'Analog Left AUXL' lines; the Mic-in uses the 'Analog Left Main Mic' and the 'Analog Right Sub Mic' lines. Use amixer or alsamixer to select the correct capture interface for your application.
Currently, Line-in is selected as the default capture interface. You could switch to the Mic-in interface like this:
$ amixer -c 0 sset 'Analog Right AUXR' nocap $ amixer -c 0 sset 'Analog Left AUXL' nocap $ amixer -c 0 sset 'Analog Left Main Mic' cap $ amixer -c 0 sset 'Analog Right Sub Mic' cap
