Difference between revisions of "Gallop43"

Revision as of 17:47, 13 January 2011 (view source) BobCochran (Talk | contribs) ← Older edit		Revision as of 17:56, 13 January 2011 (view source) BobCochran (Talk | contribs) Newer edit →
Line 15:		Line 15:
	==== LEDs ====		==== LEDs ====
		+	LED's are marked, from top to bottom:
		+
		+	::: ''GPIO21 (D2)''
		+	::: ''D9''
		+	::: ''D10''
		+	::: ''D8''
		+	::: ''D3 (GPIO22)''
		+
		+	The purpose and colors of some of these LEDs are unknown. D10 possibly turns on, glowing red, to indicate the external battery is charging.

---

Revision as of 17:56, 13 January 2011

Gallop43 Expansion Board

LCD Side of Board

The Gallop43 expansion board offers numerous features to help you make the most of your Overo COM. This discussion will begin with closeup photos of various parts of the Gallop43. Because many users buy an LCD to go with their Gallop43, we will begin with a tour of the buttons found on the right side of the LCD surface of the board, which is the surface you will normally see if you use the LCD a lot. Also shown in this photo are the connectors populating the right edge of Overo COM side of the board -- that is, what connectors are on the other side of those user buttons.

Corner Holes

The holes on each corner of the Gallop43 appear to be sized for 2-56 screws.

User Buttons

The buttons are marked, from top to bottom:

Reset

GPIO23

GPIO14

Power On

LEDs

LED's are marked, from top to bottom:

GPIO21 (D2)

D9

D10

D8

D3 (GPIO22)

The purpose and colors of some of these LEDs are unknown. D10 possibly turns on, glowing red, to indicate the external battery is charging.