B-flat bootlog

U-Boot 1.2.0 (May 10 2008 - 21:17:19) - PXA270@400 MHz - 1604

*** Welcome to Gumstix ***

DRAM:  64 MB
Flash: 16 MB
Using default environment

Hit any key to stop autoboot:  0
Instruction Cache is ON
Found gumstix-factory.script on MMC...
## Executing script at a2000000
Booting from mmc/microSD...
Detected: 2000896 blocks of 1024 bytes (1954MB) SD card.
Vendor: Man 1b OEM SM "00000" Date 10/2008
Product: 2975314433
Revision: 1.0
reading uimage

938812 bytes read
## Booting image at a2000000 ...
  Image Name:   Angstrom/2.6.21/gumstix-verdex
  Image Type:   ARM Linux Kernel Image (uncompressed)
  Data Size:    938748 Bytes = 916.7 kB
  Load Address: a0008000
  Entry Point:  a0008000
OK

Starting kernel ...

Linux version 2.6.21 (po@vmgentoo) (gcc version 4.2.4) #1 Tue Apr 21 22:03:08 CEST 2009
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
Machine: The Gumstix Platform
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 416.00MHz (*2.0, active)
Memory clock: 104.00MHz (/2)
System bus clock: 104.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 16256
Kernel command line: console=ttyS0,115200n8 rootdelay=1 root=/dev/mmcblk0p2
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62872KB available (1728K code, 195K data, 76K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Time: pxa_timer clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
io scheduler noop registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 80x24
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)
Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
 Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Using static partitions on Gumstix Flash ROM
Creating 3 MTD partitions on "Gumstix Flash ROM":
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00f00000 : "RootFS"
0x00f00000-0x01000000 : "Kernel"
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
XScale iWMMXt coprocessor detected.
Waiting 1sec before mounting root device...
mmcblk0: mmc0:0002 00000 2000896KiB
 mmcblk0: p1 p2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 76K
Ive
Starting udevtar: can't open 'm': No such file or directory 

Remounting root file system...
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pxa27x-ohci pxa27x-ohci: PXA27x OHCI
pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
Unknown HZ value! (84) Assume 100.
root: mount: mount point /dev/pts does not exist
root: mount: mount point /dev/shm does not exist
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
done.
Unknown HZ value! (86) Assume 100.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting to configure packages...
Nothing to be done
Finished to configure packages.
tsc2003 i2c touch screen controller
tsc2003_i2c_detect: probing address 0x48
input: tsc2003 as /class/input/input0
tsc2003 - registering input device
tsc2003_i2c_detect: device address 0x48 attached.
I2C: i2c-0: PXA I2C adapter
tsc2003 i2c touch screen controller
tsc2003_i2c_detect: probing address 0x48
i2c: error: timeout
i2c: msg_num: 1 msg_idx: 0 msg_ptr: 1
i2c: ICR: 000017ee ISR: 00000005
i2c: log: [00000045:000017e8] [00000085:000017ee]
I2C: i2c-1: PXA I2C adapter
i2c /dev entries driver