I²C
From Gumstix User Wiki
Revision as of 06:24, 14 March 2008 by Zyagon (Talk | contribs) (New page: The I²C bus uses 3 signals, SDA, SCL, and GND (ground), all of which are present on the 60 pin hirose connector. Some daughter cards allow the I²C signals to be acces...)
The I²C bus uses 3 signals, SDA, SCL, and GND (ground), all of which are present on the 60 pin hirose connector. Some daughter cards allow the I²C signals to be accessed.
Note that some older versions of the Breakout board have pins labeled incorrectly. See the breakout page for more details.
