Qtopia platform howto
From Gumstix User Wiki
Revision as of 15:46, 23 November 2010 by Aqisecoxefi (Talk | contribs)
we need qtopia to find the compiler (symlinks & path)
$ cd path-to/gumstix-oe/tmp/cross/bin ; for f in arm-angstrom-linux-gnueabi-*; do n=$(echo $f|cut -b 28-); ln -s $f arm-linux-$n; done $ PATH=$PATH:path-to/gumstix-oe/tmp/cross/bin/ ; export PATH
download and unpack
$ wget ftp://ftp.trolltech.com/qtopia/source/qtopia-opensource-src-4.3.1.tar.gz $ tar xfzv qtopia-opensource-src-4.3.1.tar.gz
configure, make and make install
$ mkdir qtopia-platform ; cd qtopia-platform $ ../qtopia-opensource-4.3.1/configure -separate-debug-info -little-endian -edition platform -xplatform arm -arch arm -no-telephony -prefix /qtopia $ make ; make install
tar image and move it to gumstix
$ cd image ; tar cfv ~/qtopia-platform.tar .
gumstix: $ mkdir /media/cf/qtopia ; tar xvf qtopia-platform.tar -C /media/cf/qtopia ; ln -s /media/cf/qtopia/ /qtopia
qtopia needs libstdc++, move it to your gumstix's /lib or somewhere it can be found
$ cd path-to/gumstix-oe/tmp/staging/arm-angstrom-linux-gnueabi/lib/ $ tar cfv ~/libstdc++.tar libstdc++.so*
libstdc++.so libstdc++.so.6 libstdc++.so.6.0.8
gumstix: $ tar xvf libstdc++.tar -C /lib
set variables for qtopia & run
$ export QWS_MOUSE_PROTO='LinuxTP:/dev/input/touchscreen0' $ /qtopia/bin/qpe -qws &
calibrate touchscreen
$ /qtopia/bin/qcop service send Launcher "execute(QString)" "calibrate" &
incomplete touchscreen and keyboard not working. mouse works
