HostAPD WiFi Access Point On Gumstix Overo

From Gumstix User Wiki
Revision as of 17:41, 21 April 2014 by BallCam (Talk | contribs)

Jump to: navigation, search

The Following USB WiFi devices have been used successfully with HostAPD as A WiFi Access Point using Gumstix Overo:

Use This Search Page to determine which model numbers and revisions can be used with Overo.

http://wireless.kernel.org/en/users/Devices/USB

Both Model Number and Revision are important. Manufacturers change chipsets between revisions.


P54USB Tested with D-Link and Linksys. 5 Volts Only, needs hub or supplemental power.


rt2800usb Tested with WRL-11713


The following Device supports hostapd by design, but has not yet been validated on Gumstix Overo:

SD8787 / W2CBW0015

uses mwifiex driver

This is the driver for the SD8787 / W2CBW0015 chip which is the replacement for the, SD8686 / W2CBW003 which is now EOL from the manufacturer.


The following device uses a manufacturer-provided Access Point Application:

SD8686 / W2CBW003

The SD8686 / W2CBW003 chip does work as an access point, BUT you must obtain the firmware and reference driver from Wi2Wi. It only works up to kernel 2.6.29 without modifying the driver to use the newer net_dev_ops API. (Which has not been done). Wi2Wi requires an NDA to download the driver.

The W2CBW003 chip is now end of life from the manufacturer.