Difference between revisions of "Category:How to - bluetooth"

Revision as of 20:53, 20 March 2008

High-fidelity Bluetooth audio

You can use A2DP with either the internal bluetooth adapter (model 08 or newer) or (for a vx board) a USB adapter.

Install the packages you'll need:

ipkg install bluez-utils bluez-utils-alsa alsa-utils-aplay alsa-utils-arecord madplay

You'll likely need the passkey agent running, at least the first time you connect:

passkey-agent --default 0000 &

put your headset in pairing mode. Usually this means starting from off and holding the power button down until it flashes. Then find the headset's address:

hcitool scan

edit your /etc/asound.conf with an adapter for bluetooth with the address you just found. My headset is made by itech, so I name the adapter after it:

pcm.itech {
 type bluetooth
 device "00:0D:3C:8A:13:06"
}

now try playing something to it:

madplay song.mp3 -r 44100 --output=wave:- | aplay -D itech

you can also live-encode the line in source to a2dp:

arecord -c 2 -f s16 -r 44100 | aplay -D itech

unfortunately for live encoding, the delay is pretty bad and for some reason I can never get stereo audio from the line-in source.