Change boot logo
custom logo by the following method:
The gumstix-fb-logo.patch is a diff between a custom image and the default Penguin 'logo_linux_clut224.ppm'. This image can be found in (for a Verdex):
You'll need the original image, so you can perform the following steps to get a pre-patched kernel:
bitbake -c clean gumstix-kernel
bitbake -c unpack gumstix-kernel
After you implement your patch, do:
to finish the build.
You can then copy uImage over, and hopefully have a pretty, custom logo.
If the compile fails, it's likely due to a problem with your PPM. In Gimp, you need to set the palette to 224 colors and make sure you save it as ascii.