User:Spramanik

Bitbake on Ubuntu

Installing and Running Hello World By Sarah Pramanik

Getting Started

Download Ubuntu from: [1] Burn ISO Image to a disk Put Disk into machine of your choice (These examples are run on an Acer Aspire Model: KAW60) Install Ubuntu from Disk

Once Ubuntu is up and running Type: $ sudo passwd $ yourpassword Configure internet access using: $ ifconfig eth0 xxx.xxx.xxx.xxx OR $ net-setup Note: On the Acer, Ubuntu automatically connected Note: Every command run with sudo will require yourpassword in order to run

Dependencies There are a couple of dependencies which must be installed first: Monotone (or bitkeeper, but I used monotone) This requires that Boost is installed Pyscho JIT Compiler Python compiler (should come with OS) Download These from [2] [3] [4]

Create a directory under your home directory called slug cd /home/yourname mkdir slug Place all of the downloaded files into this directory and extract them. Either by right clicking and choosing extract OR $ gunzip –d name followed by $ tar –xfv name

Monotone Monotone will not install without other dependencies. Run the following: $ sudo apt-get install autoconf $ sudo apt-get install automake $ sudo apt-get install gettext $ sudo apt-get install libboost-dev $ sudo apt-get install libz-dev $ sudo apt-get install g++

Run the commands: $ sudo apt-get install boost_1_38_0 $ sudo apt-get install python $ sudo apt-get install make $ sudo apt-get install subversion $ sudo apt-get install psycho OR $ sudo ./setup.py install $sudo apt-get install mtn-0.42-linux-x86

Configuring To configure monotone: Create a configure script in /home/yourname/slug if one is not created. Include the following lines in the script: $aclocal-1.9&&autoreconf –install $AUTOMAKE=automake-1.9 ACLOCAL=aclocal-1.9 autoreconf install Download automake1.9 (if not installed) from [5] Extract and run $sudo apt-get install automake1.9 Then run $sudo ./configure

To fetch the monotone sources run: mtn --db=mt.mtn db init mtn --db=mt.mtn pull monotone.ca “net.venge.monotone*” mtn --db=mt.mtn --branch=net.venge.mnotone checkout monotone-sources

Getting Bitbake You can either download bitbake from: [6]

OR  in /home/yourname/slug and run:

$sudo mkdir bitbake $cd bitbake $sudo svn co svn://svn.berlios.de/bitbake/branches/bitbake-1.4 bitbake Additional help can be found at [7] If you downloaded bitbake, then save and extract the files in /home/yourname/slug cd into the bitbake directory You can either run: $sudo apt-get install bitbake OR $ sudo ./setup.py install --prefix=/usr/local

Run the following: $sudo mkdir openembedded $cd openembedded $sudo mkdir packages $cd packages $sudo mkdir file $cd file Create the following files

Set-env OEROOT="/home/yourname/slug" OESYS=$OEROOT/bitbake-1.8.12 PKGDIR=$OEROOT/openembedded OEBUILD=$OEROOT/build BBPATH=$OEBUILD:$PKGDIR:$OESYS PATH=$OESYS/bin:$PATH cd $OEBUILD LD_LIBRARY_PATH= export PATH LD_LIBRARY_PATH BBPATH export LANG=C unset LC_CTYPE unset CC unset CXX alias bb=bitbake echo "Environment set up for OpenEmbedded development."

Local.conf OEROOT = "/home/yourname/slug"

DL_DIR = "${OEROOT}/sources"
BBFILES = ${OEROOT}/bitbake-1.8.12/openembedded/packages/*/*.bb
BBPATH = ${OEROOT}/bitbake-1.8.12
OEMASK = ""
PREFERRED_PROVIDERS = " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
MACHINE = "nslu2"
DISTRO = "unslung"
OEINCLUDELOGS = "yes"

Hello-1.0.bb DESCRIPTION = "hello world sample program"PR = "r0"DEPENDS = ""SRC_URI = "file://hello.c"S = "${WORKDIR}"do_compile () { ${CC} ${CFLAGS} ${LDFLAGS} -o hello hello.c}do_install () { install -d ${D}${bindir}/ install -m 0755 ${S}/hello ${D}${bindir}/}FILES_${PN} = "${bindir}/hello"

Hello.c

1. include "stdio.h“

main() {

 printf("Hello World\n");

}

Where to put the files /home/yourname/slug/set-env /home/yourname/slug/bitbake-1.8.12/openembedded/packages/hello-1.0.bb /home/yourname/slug/bitbake-1.8.12/openembedded/packages/file/hello.c /home/yourname/slug/bitbake-1.8.12/conf/local.conf

In the bitbake.conf file – located in the conf folder, ensure that OEDIR is set to: /home/yourname/slug Also ensure that you change the path in the files you just created to match your directory structure

In /home/yourname/slug run: $sudo ./set-env This sets up the openembedded environment which is needed to finish running everything from bitbake

Building Hello World Once all files are in the correct place and the dependencies are installed, run the following: $cd /home/yourname/slug/bitbake-1.8.12/openembedded/packages $bitbake world OR run: $bitbake –b hello World will build everything in the folder -b hello will only build the hello package

$sudo apt-get install hello

$hello This will print out “hello world!”

Other Factors These instructions will change depending on the OS being used. Tutorial was based on information from: [8]For More information please see the above mentioned site

Question / Comments For other questions, comments, or if you find anything incorrect, please contact me at:

      sarah.pramanik@gmail.com