Search results

<big>''Welcome to the Gumstix User Wiki''</big> ...is entirely user generated and supported. Please contribute your know-how to help your fellow developers.

...the Palo43 board and another video showing how to connect a flex connector to the Palo43 board. ...] that explains how to connect a Gumstix Overo COM to Samsung's 7-inch TFT-LCD (800 x 480 x 24bit color).

This allows you to control GPIO from the command line this way ...n 27. You can use pin 1 for a ground. (If you don't have a meter, a p/n 276-0330 1.8V Red LED from Radio Shack works for testing.)

To get started with Android on Gumstix, have a look at https://github.com/gumd ...0 used on the Gumstix Overo boards. The steps described below explain how to get Android Froyo (2.2) running on an Overo. At the current time, there is

[[Category:How_to_-_expansion_boards]] === LCD Side of Board ===